Table of Contents
Advertisement
MPC-pONE / Getting Started
6
Getting Started
1. Connect a DVI monitor to the DVI connector.
2. Plug a keyboard and/or mouse to the USB connector(s).
3. Make sure all connections have been made correctly.
4. Connect the external power supply to the power supply (2.1mm jack) connector.
5. Turn on the system by pushing the power button on front panel.
6. Enter the BIOS by pressing the Del key during boot-up.
7. Make all changes in the BIOS Setup. (More information can be found on the picoITX-SP datasheet at
www.kontron.com).
15
www.kontron.com
Advertisement
Table of Contents
