Table of Contents
Advertisement
CHARGING THE BATTERY PACK
To charge the battery pack, use the exclusive AC power adapter/battery charger AA-V6EG (provided/optional) or
car battery charger BH-V5E (optional),
Note:
The AA-V6EG AC power adapter/battery charger will accept 110 V to 240 V power supplies. Selection is auto-
matic and no adjustment is required.
A WORD
ON THE EXCLUSIVE
BN-VSGU/V6GU/V7GU
BATTERY
PACKS
ENGLISH
The BN-V5GU/V6GU/V7GU are nickel-cadmium batteries. Give attention to the
following to make the most of their characteristics.
Temperature ranges-
The recharging time is based on room temperature of 20°C.
The lower the temperature, the longer the recharging time.
Do not
Forcharging:
10°C to 35 °C
short-circuit
For operating:
0°C to 40°C
For storing:
-10°C to 30°C
'Terminals
The battery pack has been kept in the uncharged state for shipment. Therefore, before use, charge it.
BE SURE TO CAREFULLY
READ THE CAUTION
ATTACHED
TO THE BATTERY
PACK.
Charging procedure
' Charging time
PRECAUTIONS
elf used near a radio, the provided AA-V6EG
AC
Power
adapter/battery
charger may interfere with
reception.
@Prevent
inflammables,
water and metallic objects
from entering the unit.
®Do not disassemble or modify the unit.
®Do not apply shocks to the unit.
®Do not subject the unit to direct sunlight.
®Avoid
using the unit in extremely
hot or humid
places,
@ Avoid using the unit in places subject to vibrations.
BN-V6GU 70 min.
®@The charging time differs depending on the ambient
temperature and the condition of the battery pack.
Note:
The optional
BH-VSE
Car Battery Charger can
charge
the
batteries
from
a car
battery.
For
details refer to the instructions of the BH-V5E.
Connect
the AC power cord to a wall outlet
(The POWER
indicator wil! light.)
Recording time for the
GR-65E
BN-V5GU 25 min.
BN-V6GU 60 min.
y Align the marks on the battery pack and adapter.
BN-V7GU 80 min.
ce] Slide
the battery pack
in the direction
of the
GIT ONE TV CLOCKS (1 PLACE,
~The recording ume per charge Is influenced by the
duration of recording standby, frequency of zoom-
When
charging is completed,
the CHARGE
indi-
ing, etc. It is safer to have spare battery packs.
cator that is red turns green.
rz]
USING THE REMOTE CONTROL UNIT (optional)
The remote contro! unit RM-V15U
(optional) permits
VCR functions to be controlled from a distance.
AUDIO DUB button
@EDIT button
INSERT REC button
e@POWER button
@REW button
®@PLAY button
Press for playback. To
enter Rec mode, Press
together with REC
button.
@FF button
@ANIM button
Press for the animation
function
@START/STOP button
Animation function
The Rehearsal mode cannot be engaged using this unit.
@Plug the remote control cable of the remote control
unit into the remote connector on the VideoMovie,
Unless
otherwise
specified, the controls on the remote
control
unit function
exactly as those on the Video-
Movie.
VISS button
This button does not function with this VideoMovie.
REC button
Press
together
with
PAUSE/STILL
button
to enter
Rec
Standby mode, then press PLAY to begin recording.
PAUSE/STILL button
Press together with the INSERT
REC button for insert re-
cording.
Press this button to pause during recording and playback as
well,
STOP button
Animation
produces the illusion of movement
in otherwise stationary scenes or objects. This technique is ac-
complished by shooting a series of slightly different pictures of the same scene or slightly different poses of the
same object for a brief period of about 1/2 second.
Operation
1. With the VideoMovie in the Record-Pause mode.
2. Press the ANIM
button of the remote control unit
RM-V 15U.
@Recording
mode
indicator and
Pause mode
in-
dicator blinks alternately
on the VideoMovie's
LCD.
3. Press the Recording Start/Stop button or Play but-
ton after focusing the camera on a subject.
4. Recording stops automatically in the Record-Pause
mode after about 1/2 second,
5. Repeat step 3 for the required number of shots.
6. Playback
the recorded
series to check
if results
were satisfactory.
Notes:
@The Animation mode can only be engaged from the
Record-Pause mode.
®@Before recording in the Animation mode at the very
beginning
of a tape, set the VideoMovie
to the
Record mode for about 5 seconds, in order that the
tape runs smoothly. Using the Fadein function at
this point is a good way to begin an animated pro-
gramme.
®During
an Animation
sequence,
fading cannot be
engaged.
@Release the Animation mode by pressing the ANIM
button or the STOP button.
@if recorded background sound is undesirable, use
the Audio Dubbing function to erase or replace it.
@When
playing
back
an
animated
recording,
the
colour may be unstable with same TVs.
ENGLISH
28
Advertisement
Table of Contents
