Ford 1996 Windstar Manual page 355

Taillamp lens removal
Grasp lens along liftgate opening edge and pull straight
4.
rearward until snap attachment releases.
Remove bulb and socket by twisting to unlock and pulling
5.
straight out.
Remove bulb from socket by pulling straight out from
6.
socket.
To install a taillamp bulb:
Insert new bulb into socket by pushing bulb until it is locked
1.
in position.
Install socket into lamp by aligning socket to lamp and
2.
turning clockwise until locked in place.
Align pins along liftgate edge with holes in body and snap
3.
attachment into retainer.
Rock lens around on outer edge and snap in second snap
4.
attachment.
Replace two screws along top edge of lens.
5.
Servicing Your Windstar
355