Table of Contents
Advertisement
Turn the Temperature Control Knob toward the WARM
2.
(red) area.
Turn the Fan Speed Knob to the speed of your choice. When
3.
your vehicle warms up, you may want to set the Fan Speed
Knob to a lower speed, or adjust the Temperature Control
Knob to a lower setting to maintain a comfortable
temperature.
To defrost the windshield and side windows:
Turn the Function Selector Knob to V (DEFROST), turn the
Temperature Control Knob to the WARM (red) area and turn
the Fan Speed Knob to the position of your choice.
To heat and defrost at the same time:
Turn the Function Selector Knob to P
(DEFROST/FLOOR),turn the Temperature Control Knob and
the Fan Speed Knob to provide the temperature and fan
speed you prefer.
Do not place objects under the front seats unless your vehicle is
equipped with an under seat storage tray. Improperly stored
objects will interfere with the flow of air to the back seats.
Remove any snow, ice, or leaves from the area below the
windshield on the outside of your vehicle. They could block the
air intake.
Heating and Air Conditioning System
Turning On the Heat
You can heat the inside of your vehicle and defrost the
windshield using the Function Selector Knob located in the
control assembly in the instrument panel.
The seven function selector modes are: MAX A/C, AC, Q
(PANEL), S (PANEL/FLOOR), R (FLOOR), P
(DEFROST/FLOOR), and V (DEFROST). If your vehicle is
112
Hide quick links:
Advertisement
Table of Contents
