Ford 1996 Windstar Manual page 215

NOTE: Illuminated bars in the display show relative levels of
bass and treble and positions of speaker balance and
fader functions for five seconds after adjustments are
made, then revert to volume level set.
Using the Controls of Your Cassette Tape Player
How to insert a tape
Your cassette tape player is equipped with power loading. Once
you insert a tape and push slightly (with the open edge to the
right), the loading mechanism draws the tape the rest of the
way in and play will begin after a momentary tape tightening
process. Display indicates "M" (for metal/CrO
playing.
There are four ways to quickly locate a desired selection on the
tape. You can use the fast forward, rewind, "SEEK" or "SCAN"
function. Following are brief descriptions of each.
Fast forwarding the tape
To fast foward the tape, press the "FF" button. The radio
will automatically begin playing until fast forward is
manually stopped. At the end of the tape, the direction
automatically reverses and plays the other side of the tape.
Rewinding the tape
To rewind the tape, press the "REW" button.
How to change the track of the tape being played
The alternate track of the tape can be selected anytime by
pressing the "PLAY/PROG" button.
Using the "SEEK" function with your cassette tape player
While in the tape mode, push the right ( a ) side of the
"SEEK" button to seek forward to the next selection on the
tape. Push the left ( b ) side to seek the previous tape
selection.
Electronic Sound Systems
) while tape is
2
213