Ford 1996 Windstar Manual page 204

How to insert a disc and begin play
Insert one disc, label side up into the disc opening. When
inserted, the disc automatically loads into the unit and play
starts at the beginning of the first track (selection).
When the disc reaches the end, the disc player automatically
returns to the beginning of the disc and resumes playing.
NOTE: Once a disc is inserted, the disc opening is secured to
prevent the accidental insertion of a second disc.
NOTE: The CD player has heat protection circuitry to protect
the laser diode. If the temperature of the player
reaches 167˚F (75˚C), the heat detection circuit will
shut off the player and "TOO HOT" will scroll in the
display for five seconds (radio will resume playing).
When the temperature returns to normal operating
range, the CD player will again be operational.
How to stop and restart the CD player
When a disc is loaded, the unit automatically enters the play
mode and the play indicator a illuminates. To stop
temporarily, press the "PLAY/STOP" button or the "AM/FM"
button. The stop indicator X in the display illuminates and
operation returns to the radio mode. To resume CD play, press
the "PLAY/STOP" button once again.
NOTE: If the ignition key is turned OFF during play and
then is set to the ON or ACCESSORY position, the
CD player will resume playing in the mode it was in
when ignition was turned off.
202