Ford 1996 Windstar Manual page 143

TAP-UP — Press and then quickly release the SET ACCEL
switch. Each time you "tap" the switch, the set speed will
increase by 1 mph (1.6 km/h). Multiple taps will cause the
set speed to increase in increments of 1 mph (1.6 km/h). For
example, if the current set speed is 55 mph (88 km/h), five
taps of the SET ACCEL switch will increase the vehicle
speed and set it at 60 mph (97 km/h).
To Cancel or Turn Off Speed Control
The speed control can be cancelled at any time by depressing
the brake pedal slightly. After cancelling, you can return to the
speed you set by pressing the RESUME switch, or set a new
speed by pressing the SET ACCEL or COAST switch.
Speed control can also be cancelled when you press the OFF
switch. The speed control system will remain off until you press
the ON switch and reset the speed control.
In addition, the speed control is turned off each time you turn
the vehicle off.
Resuming a Set Speed
If you press the brake pedal, the speed control is cancelled. You
can return to the speed you set by using the RSM switch, as
long as you did not press the OFF switch.
To resume the speed you had before, you must be driving at
least 30 mph (50 km/h).
Press and release the RESUME switch. Your vehicle gradually
returns to the previously set speed and then maintains it.
Steering Column Controls
141