Ford 1996 Windstar Manual page 279

The jack and handle assembly
Turn the lug nut wrench (attached to the jack handle)
7.
clockwise to raise the vehicle off the ground.
Remove the wheel lug nuts with the lug nut wrench.
8.
Remove the flat tire and replace it with the spare tire.
9.
Place the wheel lug nuts on the spare tire. Use the lug nut
10.
wrench to screw the lug nuts snug against the wheel, but do
not tighten fully.
Lower the vehicle by turning the jack handle
11.
counterclockwise.
Use the wheel lug wrench to tighten lug nuts in the
12.
appropriate sequence. Re-check for complete tightness.
Roadside Emergencies
277