Ford 1996 Windstar Manual page 224

Setting the AM or FM frequency band
Push the "BAND" button to change the frequency band.
Using the "MEMORY" button
Push the "MEMORY" button to access the station you have set
into memory button 1 on the face of the radio. Successively
pushing this button will access, numerically, all stations set into
the Station Memory Preset buttons (1 through 5).
How to turn the speakers on and off
When the rear seat controls are on, push the "SPKRS ON-OFF"
button to turn all speakers off. Push again to turn all speakers
on.
NOTE: Turning the ignition off, then on again will not turn
the speakers back on, if previously turned off by the
"SPKRS ON-OFF" button on the rear seat controls.
Using the "SEEK" function
Press the right ( a ) side of the "SEEK" rocker switch to seek to
the next radio station. Press the left ( b ) side of the "SEEK"
rocker switch to seek to the previous radio station.
NOTE: When using the rear seat controls with a High-Level
Audio System, the "SEEK" function on the rear seat
controls will also function with cassettes, seeking the
next ("SEEK a ") or previous (" b SEEK") selection
on the tape.
Using headphones with the rear seat controls
Two 3.5mm headphone jacks have been provided on the rear
seat controls. Plug headphone(s) into the provided jack(s) to
operate headphones.
222