Table of Contents
Advertisement
Anti-Theft System (if equipped)
When armed, this system helps protect your vehicle against
break-ins or theft.
When an unauthorized entry occurs, the system triggers and
will:
flash the headlamps, parking lamps, and alarm indicator
lamp
honk the horn
disable the starting circuit to prevent the vehicle from being
started
Arming the system
Remove the key from the ignition. The hood must be closed
1.
to arm the system.
Open any door. The alarm indicator light will start flashing
2.
to remind you to arm the system.
Lock the doors by using the power door lock switch. The
3.
alarm indicator light will now glow steadily.
Close all doors. The alarm indicator light will then remain
4.
on steadily for 30 seconds and then go out. When the light
goes out, the system is armed.
NOTE: Be sure to close all doors completely. If not, the alarm
indicator light will remain on. Remember, your
anti-theft system is armed only after the alarm
indicator light remains on steadily for approximately
30 seconds after the last door is closed, and then goes
out.
You can also arm the anti-theft system with the factory installed
remote entry system or the keyless entry system by following
this sequence:
156
Hide quick links:
Advertisement
Table of Contents
