Table of Contents
Advertisement
To fold up the child seat:
Fold the protector flap over the child seat cushion. Refer
1.
back to Figure 3.
Rotate the child seat cushion upward.
2.
Push the headrest release lever and slide the headrest
3.
downward until it latches against the child seat cushion.
Refer back to Figures 1 and 2.
When the child seat is not in use, it may be folded up so
4.
that an adult may use the vehicle's rear seat.
Inspection after a collision
All built-in child restraints, including seats, buckles,
retractors, seat latches, interlocks, and attaching hardware
should be inspected by a qualified dealer technician after
any collision.
If the child seat was in use during a collision, Ford recommends
replacing it. However, if the collision was minor and a qualified
tehcnician finds that the child restraints do not show damage
and continue to operate properly, they do not need to be
replaced. If there is any bending of the vehicle seat back or seat
structure, it should also be replaced. Built-in child seats not in
use during a collision should also be inspected and replaced if
either damage or improper operation is noted.
Cleaning
Your Built-In Child Seat may be cleaned with mild soap and
water. Do not use household cleaners as they may weaken the
webbing or damage the plastic parts. For your convenience, the
liner is made to be machine washable and air dried.
Safety Restraints
RWARNING
37
Hide quick links:
Advertisement
Table of Contents
