Ford 1996 Windstar Manual page 352

Hide thumbs Also See for 1996 Windstar:
Table of Contents

Advertisement

The alignment of your headlamps should be checked if:
oncoming motorists frequently signal you to turn off your
vehicle's high beams when you do not have the high beams
on
the headlamps do not seem to give you enough light to see
clearly at night
the headlamp beams are not pointed slightly down and to
the right
Replacing the Headlamp Bulb
The headlamps on your vehicle use replaceable bulbs. When the
lamp burns out, simply replace the bulb, rather than the whole
lamp.
Handle a halogen headlamp bulb carefully and keep out
of children's reach. Grasp the bulb only by its plastic
base and do not touch the glass. The oil from your hand
could cause the bulb to break the next time the
headlamps are operated.
Do not remove the burned out bulb unless you can immediately
replace it with a new one. If a bulb is removed for an extended
period of time, contaminants may enter the headlamp and affect
its performance.
To remove the headlamp bulb:
Make sure that the engine is off and the headlamp switch on
1.
the instrument panel is in the OFF position.
Lift the hood and locate the headlamp bulb installed in the
2.
rear of the headlamp. Remove the electrical connector from
the bulb by pulling the connector away from the bulb
assembly.
352
RWARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1995 windstarWindstar

Table of Contents