Ford 1996 Windstar Manual page 227

Electronic Stereo and Stereo Cassette
Radios
Using the Controls on Your New Radio
How to turn the radio on and adjust the volume
Press the "POWER" button to turn the radio on. Press it again
to turn it off.
Press the right (+) side of the "VOLUME" button to increase the
volume. Press the left (-) side of the button to decrease the
volume. Illuminated bars in the display show the relative
volume level.
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a "nominal" listening level. However, if
the radio power is turned off (with the "POWER"
button), the volume will remain in the position it was
set at when radio power is switched back on.
Selecting the AM or FM frequency band
Push the "AM/FM" button to select the desired frequency band.
Pushing the button more than once will alternate between AM,
FM1 and FM2. These functions are used with the station
memory buttons described under How to tune radio stations.
How to tune radio stations (Stereo Radio)
There are three ways for you to tune in to a particular station.
You can manually locate the station by using the "TUNE"
button, "SEEK" the station or select the station by using the
memory buttons, which you can set to any desired frequency.
Electronic Sound Systems
225