Table of Contents
Advertisement
Enclosure Ground Strap
Ensure that the enclosure ground strap is connected to the designated studs on both the metal enclosure and
the enclosure cover. Be sure the cable lug is positioned between two star washers and securely tightened with
a nut as illustrated in the diagram below.
Enclosure Cover
Stud
Enclosure Ground Strap
Use the enclosed star washers and nuts to secure both
ends of the cable to the studs as shown on the right.
KI-00117E-07-11
Keyscan Technical Guide (PC109x - 04.12)
Figure 14 – Enclosure Ground Strap Connection
Stud
Metal Enclosure
Side View of Stud with Cable Lug Connection
Cable
Lug
Nut
Stud
Star
Washers
26
Advertisement
Table of Contents
