Yellow (Beeper) used for pre-alert
otherwise isolate and tape back.
If connecting external sound device,
see Pre-Alert Relay Option or refer to
ACU cut sheet enclosed with panel
for ACU/OCB8 relay assignments.
Note - If Pre-alert is connected,
the reader cannot read any
HID 125 kHz-compatible card
during the pre-alert beep.
ACU
Ground
Lug
KI-00201E-07-11
Keyscan Technical Guide (PC109x - 04.12)
Figure 97 – HID-5395 Wiring
HID-5395
with
00 LED
Example 5395CG100
Shield
C1
LED D1
(BEEP)
Reader terminal on control board
Shield not
connected.
Isolate with electrical
tape.
6 conductors - shielded 22 AWG
Maximum - 500 ft (152.4 m)
D0
PWR
GND
WHT
GRN
RED
BLK
127