Table of Contents
Advertisement
Appendix A – Keyscan /
HID Readers
Appendix A reviews typical connections for Keyscan and HID readers. Wiring diagrams are on the following
pages. Refer to the appropriate diagram for specific reader connections. Be sure to use a cable that complies
with the reader's wiring specifications.
Power Specifications
The following table outlines HID reader power specifications:
Reader
K-PROX2 & K-PROX SG(125 KHz HID
compatible)
K-VAN
K-KPR
K-SMART (13.56 MHz)
K-SMART – 125
K-SMART GOV
K-SMART GOV/125
K-KPR-SM Mifare
K-KPR-SM/125
K-KPR-GOV
K-KPR-G/125
HID-5365
HID-5395
HID-6005
HID-5455
HID-5355KP
HID 5375
HID iClass – Rev A
HID iClass KEYR10
(HID label – 6100AKN0010 – Rev A)
Keyscan Technical Guide (PC109x - 04.12)
Table 19 – Keyscan & HID Reader Power Specifications
Power
12 VDC, 80 mA
12 VDC, 90 mA
12 VDC, 115 mA
12 VDC, 210 mA
12 VDC, 210 mA
12 VDC, 210 mA
12 VDC, 210 mA
12 VDC, 220 mA
12 VDC, 220 mA
12 VDC, 220 mA
12 VDC, 220 mA
12 VDC, 75 mA
12 VDC, 115 mA
12 VDC, 75 mA
12 VDC, 125 mA
12 VDC, 120 mA
24 VDC, 1.5 A
12 VDC, 225 mA
Notes
Requires 18 AWG cable. Connect to separate 24 VDC 2
Amp linear power supply. (Not supplied with ACU)
Connect to separate 12 VDC 4 Amp linear power supply
(not supplied with ACU kit) for CA 8000 when
connecting 8 readers. For all other models connect
power (red) of iClass reader directly to DPS-15 power.
120
Advertisement
Table of Contents
