Commissioning
6.1
Basic safety notes
6.1.1
Hot surfaces
Hot surfaces
Risk of burns resulting from hot surfaces.
● Take corresponding protective measures, for example by wearing protective gloves.
6.1.2
Toxic gases and liquids
Toxic gases and liquids
Danger of poisoning when venting the device: if toxic process media are measured, toxic
gases and liquids can be released.
● Before venting ensure that there are no toxic gases or liquids in the device, or take the
6.1.3
Loss of explosion protection
Loss of explosion protection
Risk of explosion in hazardous areas if the device is open or not properly closed.
● Close the device as described in Installing/mounting (Page 23).
SITRANS LR260 with mA/HART
Operating Instructions, 11/2019, A5E32337683-AD
WARNING
DANGER
appropriate safety measures.
WARNING
6
45