High Calibration Point (High Calib. Pt.) (1.6.); Apply (1.7.); Setup (2.); Device (2.1.) - Siemens SITRANS LR260 Operating Instructions Manual

8.4.6

High Calibration Point (HIGH CALIB. PT.) (1.6.)

Distance from Sensor Reference to High Calibration Point: usually process full level.
(See Operation (Page 75) types for an illustration.)
Values
Related parameters
When setting the High Calibration Point value, note that echoes are ignored within Near Range
(2.2.1.12.) (Page 81)
8.4.7

Apply (1.7.)

In order to save the Quick Start settings, it is necessary to select Yes and apply changes.
● Press Mode to return to Measurement mode.
8.5

Setup (2.)

Note
● See Programming via the handheld programmer (Page 51) or Operating via SIMATIC PDM
(Page 59) for instructions.
● Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly
stated.
● Values shown in the following tables can be entered via the handheld programmer
8.5.1

Device (2.1.)

8.5.2

Firmware Revision (FIRMWARE REV.) (2.1.1.)

Corresponds to the software or firmware that is embedded in the SITRANS LR260. Read only.
SITRANS LR260 with mA/HART
Operating Instructions, 11/2019, A5E32337683-AD
Options
Range: 0.0000 to 30.000 m
Default: 0.0 m
Near Range (2.2.1.12.) (Page 81)
YES, NO, DONE
Display shows DONE when Quick Start is suc‐
cessfully completed.
Parameter reference
8.5 Setup (2.)
77