Device Status Icons - Siemens SITRANS LR560 Operating Instructions Manual

Device Status Icons

Priority
Icon
Level
1
2
3
1
2
3
1
2
3
1
2
3
7ML19985LT01 SITRANS LR560 (PROFIBUS PA) – OPERATING INSTRUCTIONS
Meaning
• Maintenance alarm
• Measurement values are not valid
• Maintenance warning: maintenance demanded immediately
• Measured signal still valid
• Maintenance required
• Measured signal still valid
• Process value has reached an alarm limit
• Process value has reached a warning limit
• Process value has reached a tolerance limit
• Configuration error
• Device will not work because one or more parameters/components
is incorrectly configured
• Configuration warning
• Device can work but one or more parameters/components is incor-
rectly configured
• Configuration changed
• Device parameterization not consistent with parameterization in
project. Look for info text.
• Manual operation (local override)
• Communication is good; device is in manual mode.
• Simulation or substitute value
• Communication is good; device is in simulation mode or works with
substitute values.
• Out of operation
• Communication is good; device is out of action.
Page 107