PICOTE Smart Cutter DN100 Operating & Safety Manual page 5

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
This section contains important safety information. Failure to comply could result in serious injury or death.
ENVIRONMENTAL
Operational Ambient Temperature Range:
Storage Ambient Temperature Range:
TRANSPORT
Picote tools should be transported in car or other vehicle properly secured to prevent any sudden movements caused
by hard braking or accident. Using lidded boxes which are fastened and stored on the bottom of a van is recommen-
ded.
Never transport machine with tool attached to the shaft.
If using pick-up or trailor to transport Picote machine or tools, cover the products to protect them from raining water
and dust.
STORAGE
It is recommended that tools are stored indoors protected from rain and sunlight and in constant ambient temperature.
If products have been stored for long periods of time (over 2-3 months), it should be checked and tested prior to use in
field.
DISPOSAL
TM
Smart Cutter metallic and plastic components can be separated and disposed separately as plastic and metal waste.
Always follow the local waste handling rules and regulation.
o o
-10...50 C (14...122 F) frost and condensation free
o o
-20...60 C (-4...140 F) frost and condensation free
5