Safety Information & Symbols - PICOTE Smart Cutter DN100 Operating & Safety Manual

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
SAFETY INFORMATION
Safety Symbols
Safety symbols are used throughout this manual to draw attention to potential hazards.
Danger risk of serious injury or death by electrocution, follow instructions
Danger risk of serious injury or death by electrocution, follow instructions
Danger risk of serious injury, follow instructions
Danger risk of serious injury from rotating parts
Danger risk of serious injury from hot parts
Danger do not touch. Risk of injury, follow instructions
Personal Protective Equipment (PPE)
Always use Personal Protective Equipment when using the Smart Cutter
systems, including suitable overalls / protective clothing & footwear and the following:
Always wear suitable eye protection when using the Smart Cutter
sewage, chemicals or dust from irritating your eyes.
Always wear suitable ear protection when using the Smart Cutter
systems to prevent any hearing loss.
Always wear suitable cut-resistant gloves when using the Smart Cutter
prevent any hand injuries. Any open injuries or skin irritations should be cov-
ered at all times to avoid contact with sewage, chemicals or dust.
Always wear a suitable ventilation mask when using the Smart Cutter
systems to prevent any resin dust being inhaled or consumed, which can cause
occupational asthma or dermatitis as well as eye irritation.
This section contains important safety information. Failure to
comply could result in serious injury or death.
TM
and Miller
TM
to prevent
TM
and Miller
TM
to
TM
or Miller
3