Oil Tank - Haulotte Compact 8 Maintenance Book

Control-Filling-up

Oil tank

Control-Filling-up
Oil tank
1 - You will need
• Standard tool kit
• Protective goggles
• Gloves
2 - Preliminary procedure
1. Place the machine in maintenance configuration.
figuration
3 - Control
Check the oil level when cold (before beginning a new period of work).
The oil level ( 1 ) must be between the upper and lower markers .
4 - Filling-up
For COMPACT 8 (COMPACT 2032E) - COMPACT 8W (COMPACT 2247E) - COMPACT 10N (COMPACT 2632E) -
COMPACT 10 (COMPACT 2747E) - COMPACT 12 (COMPACT 3347E) - COMPACT 14 (COMPACT 3947E)
Check that the oil level is between the indicated minimum and maximum levels.
Top up the oil level, if necessary :
• Oil level is too high 1
• Oil level is too low 2
1. Loosen and remove the tank cap .
2. Top up the oil level.
3. Refit and tighten the tank cap .
5 - Additional operation
1. Place the machine in its operating configuration.
4001012670 E 06.20
M001
• Place barriers around the perimeter of the work area
3.3.1-Placing the machine in maintenance con-
1
3.3.2-Placing in operating configuration
USA / GB
2
47