Haulotte Compact 8 Maintenance Book page 66

Replacement-Tightening
Wheel
3 - Criteria of replacement
Replace the wheels and the tires if any of the following conditions exist :
• Presence of cracks, damage, deformation or other faults on the hub
• Damage to the tire :
• Cut or hole > 3 cm (2 in) in the rubber side wall.
• Blister or pronounced lump on the external and lateral wall.
• Damaged wheel stud.
• Damage or wear on the side wall to the extent that the reinforcing wire is visible.
• Nonlinear wear of the ground contact surface greater than 10 %.
• Consistent wear of the ground contact surface greater than 25 %.
For safety reasons, always use original HAULOTTE® spare parts that are specific to this machine. Refer
to the spare parts catalog.
66 4001012670 E 06.20
M006
USA / GB