Haulotte Compact 8 Maintenance Book page 60

General data
Braking test procedure
4 - Test procedure
The brake system is a significant component of the safety of the machine. The following tests must be performed
periodically Section D - Inspection and maintenance schedule.
High speed :
• On a flat ground or slightly inclined (always lower than the authorized slope: see plate manufacturer).
• Trace on the ground, a line being used as reference mark of stop.
• Roll moving front until reaching maximum speed :
• Between 3 km/h (1.9 mph) and 6,5 km/h (4,039 mph) according to the machines.
• Release the manipulator as soon as the wheels axles are on the level of the traced reference mark.
• Stopped machine, measure the distance between the wheel axles and traced reference mark on the ground :
• If the distance lies between 0.2 m (0ft 8in) and 2,7 m (8 ft 11 in), the test is validated.
• If not, Contact HAULOTTE Services® to repair the system.
60 4001012670 E 06.20
MS0004
USA / GB