Haulotte Compact 8 Maintenance Book page 40

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N
(C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
D -
Inspection and maintenance schedule
Periodic
General
Check for the presence, cleanliness and readability
of the manufacturer's plates, security labels, user
manual and maintenance manual
Check the cleanliness and readability of the control
box
Check chassis opening and locking of covers
Check the condition of electrical harnesses, cables
and connectors
Check for the absence of abnormal noise and jerky
movements
Check for the absence of visible deterioration and
damage
Check for the absence of cracks, broken welds and
chipped paintwork on the structure
Check for the absence of missing or loose screws
and bolts
Check for the absence of deformation, cracking and
breakage of axis stops, bushing and axes
Check for the absence of foreign bodies in joints and
sliding parts
Safety devices
Test the operation of the upper and lower control
boxes: manipulators, switches, buttons, horn,
emergency stops, screens and lights
Check the absence of visual and audible alarms
Test the operation of the tilt system
Test the operation of the emergency lowering system
Test the operation of the drive speed limiter systems
Test the speed and behavior of movements
Check the operation of the load control system -
Calibrate if necessary
Test the overriding system
40 4001012670
Page or
associated
procedure
E 06.20
Comments
USA / GB