Haulotte Compact 8 Maintenance Book page 52

General data
Pins and bearing inspection
6.2 - B
EARINGS
For the reassembly of bearings, respect the following stages :
• Clean boring and/or the pins to remove all the foreign bodies.
• Slightly lubricate boring and/or pins.
• Lubricate the ring of the bearing slightly.
• To fit bearing in a boring: take support on the external ring of the bearing.
• To fit bearing on an axis: take support on the interior ring of the bearing.
52 4001012670 E 06.20
MS0002
USA / GB