Maintenance Support - Haulotte Compact 8 Maintenance Book

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N
(C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
C -
Familiarization
1.2 - M
AINTENANCE SUPPORT
The maintenance stand must be in place before any maintenance operation is begun.
COMPACT 8 (C 2032E) -
COMPACT 8W (C 2047E)
COMPACT 14 - COMPACT 3947E
The maintenance support (on both sides of the machine)
must be put in place before any maintenance operations.
Placing the machine in maintenance configuration :
• Lift scissor arms to a sufficient height to tilt the stand.
• Unscrew, rotate and put the stand in the vertical position.
• The stand should remain in the vertical position.
• Lower the scissor arms.
• Scissor arm pivoting rod should rest on the V groove of the stand.
Putting in use position :
• To put back the machine into its normal operation, reverse the steps used above.
22 4001012670
COMPACT 10 (C 2747E)
E 06.20
COMPACT 10N (C 2632E) -
COMPACT 10N-1
COMPACT 12
(C 3347E)
USA / GB