Haulotte Compact 8 Maintenance Book page 85

Lubrication
Jib cylinder-Steering cylinder-Lift cylinder
Steering cylinder
In order to maintain the lifting cylinder in good condition and avoid any internal or external corrosion during prolonged
storage (inside or outside), proceed as follows :
• Wheels aligned
Using a brush, apply multipurpose grease (of mineral type) to all the chrome and unpainted parts of the cylinder 1.
COMPACT 8 (COMPACT 2032E) - COMPACT 8W (COMPACT 2247E) - COMPACT 10N (COMPACT 2632E) -
COMPACT 10 (COMPACT 2747E) - COMPACT 12 (COMPACT 3347E) - COMPACT 14 (COMPACT 3947E)
Lubricate the cylinder rod 1 once a month.
Do not use synthetic grease. Synthetic grease can damage the seals of cylinder.
Before operating the machine, remove the grease from the cylinder rod.
Do not high pressure wash the cylinder as this could cause damage to the cylinder rod, as well as penetration
of water into the guide seal (corrosion, contamination, seizing).
Lubricate the rod after each movement of the cylinder.
• Wheels turned and cylinder rod fully retracted
COMPACT 8 (COMPACT 2032E) - COMPACT 8W (COMPACT 2247E) - COMPACT 10N (COMPACT 2632E) -
COMPACT 10 (COMPACT 2747E) - COMPACT 12 (COMPACT 3347E) - COMPACT 14 (COMPACT 3947E)
N.B.-:-N
O MOVEMENT IS NECESSARY BECAUSE THE WAS IS IN CONNECTION WITH THE OIL TANK
4001012670
1
E 06.20
M049
.
USA / GB 85