Haulotte Compact 8 Maintenance Book page 45

General data
Structural part inspection
4.2 - M
AJOR INSPECTION
All structural part listed Section Familiarization must be disassembled and all weldsmust be review using
non-destructive checks
The criteria quoted above are applicable.
The main items to be inspected are :
• Boss welds on chassis, turret, arms, booms and jib.
• Booms and arms welds.
In the event of suspicion of crack, a cleaning and a sweating are to be carried out to guarantee the integrity
of the part before reassembly.
Check presence and torque of each bolts and screw used to assembly part listed in Section Familiarization.
Refer to spare part catalog for additional information if needed.
Some screws are not reusable and must be systematically changed (ex: screws from the gear ring).
4001012670
Section D - Inspection and maintenance schedule.
Example
E 06.20
MS0001
USA / GB 45