Oil Tank - Haulotte H14TX Maintenance Book

Control-Filling-up

Oil tank

15 min
Control-Filling-up
Oil tank
1 - You will need
• Standard tool kit
• Protective goggles
• Gloves
2 - Preliminary procedure
1. Place the machine in maintenance configuration.
configuration
3 - Control
Check the oil level when cold (before beginning a new period of work).
The oil level ( 1 ) must be between the upper and lower markers .
4 - Filling-up
If the oil level ( 1 ) is not visible :
1. Loosen and remove the tank cap ( 2 ).
2. Top up the oil level.
3. Refit and tighten the tank cap .
5 - Additional operation
1. Place the machine in its operating configuration.
4000364740 E12.14
• Place barriers around the perimeter of the
work area
3.3.1-Placing the machine in maintenance
3.3.2-Placing in operating configuration
E001
59
US/GB