Maintenance Support - Haulotte OPTIMUM 8 Maintenance Book

OPTIMUM 8 - OPTIMUM 1931 E
C
- Familiarization
1.2 - M
AINTENANCE SUPPORT
The maintenance stand must be in place before any
maintenance operation is begun.
Placing the machine in maintenance configuration :
• Lift scissor arms to a sufficient height (floor of the platform
at around 2,5 m / 8 ft 2 in from the ground).
• Pull the plastic handle and put the stand in the vertical
position.
• Release the handle. The stand should remain in the vertical
position.
• Lower the scissor arms.
• Scissor arm pivoting rod should rest on the V groove of the
stand.
Putting in use position :
• To put back the machine into its normal operation, reverse
the steps used above.
22 4001069810 E 12.19 USA / GB