Table of Contents
Advertisement
Note:
The black pin and white prong will only "snap" on in one orientation
-Check to ensure the black pin is rotated properly for installation with the slot perpendicular to the
heatsink
2-4 Install Memory
This motherboard provides two 240-pin DDR DUAL INLINE MEMORY MODULES
(DIMM) sides for DDR memory expansion available from minimum memory size of 64MB
to maximum memory size of 2.0GB DDR SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DDR1)
Bank 2, 3 (DDR2)
Total
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 240-pin DDR SDRAM module looks like.
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab should
be locked into the DIMM module very firmly and fit into its indention on both
sides.
WARNING!
For the DDR SDRAM CLOCK is set at 200MHz, use only DDR400- compliant DDR
Modules. When this motherboard operate at 200Mhz, most system will not even
boot if non-compliant modules are used because of the strict timing issues, if your
DDR Modules are not DDR400-compliant, set the SDRAM clock to 133MHz to
ensure system stability.
Click
240-pin DDR DIMM
DDRII533/DDRII400 DDR DRAM Module
DDRII533/DDRII400 DDR DRAM Module
System Memory (Max. 2.0GB)
Figure 2-4
18
PCS Total Memory
X1
64MB∼1.0GB
X1
64MB∼1.0GB
X2
64MB∼2.0GB
Advertisement
Table of Contents
