Mainboard User's Manual
Key Features
The key features of this mainboard include:
Socket-370 Processor Support
Supports PPGA/FCPGA Celeron CPUs (using a single
processor only)
FCPGA Pentium III CPUs are supported (using single or
dual processors)
Supports Cyrix MIII CPUs (using a single processor only)
Supports 66MHz, 100MHz or 133MHz Front-Side Bus
All processors are automatically configured using firmware and a
synchronous/asynchronous Host/DRAM Clock Scheme.
Memory Support
Three DIMM slots for 168-pin SDRAM or VCM SDRAM
memory modules
Support for 66MHz, 100MHz, & 133MHz memory bus
Maximum installed memory is 3 x 512 MB = 1.5 GB
Expansion Slots
One 4xAGP slot
Four 32-bit PCI slots
AMR slot for a special audio/modem riser card
Onboard IDE channels
Primary and Secondary PCI IDE channels
Support for PIO (programmable input/output) modes
Support for Multiword DMA modes, Bus Mastering and
Ultra DMA 33/66/100 modes
Power Supply and Power Management
ATX power supply connector
ACPI and previous PMU support, suspend switch,
keyboard power on/off
Supports Wake on Modem, Wake on LAN and Wake on
Alarm
2