Expansion Slots
This mainboard has one AGP slot, four 32-bit PCI expansion slots
and one AMR slot.
AGP1
PCI1
PCI2
PCI3
PCI4
AMR1
Follow the steps below to install an add-in card to one of the slots.
1. Determine which slot you need to use. The table below shows
the functions of the slots.
AGP
AGP stands for Accelerated Graphics Port. Use this
slot to install a graphics adapter which has an AGP
edge connector.
PCI
PCI stands for Peripheral Components
Interconnect. Use this slot to install current add-in
cards which have a 32-bit PCI edge connector.
AMR
AMR (Audio Modem Riser) is an industry standard
that allows for the installation of a special
audio/modem riser card. Different territories have
different regulations regarding the specifications of
a modem card.
2. Locate the AMR, PCI or AGP slot on the mainboard.
3. Remove the blanking plate from the appropriate expansion slot
on the system chassis.
4. Install the edge connector of the expansion card into the slot
and press it quite firmly down so that it is seated correctly.
2: Mainboard Installation
19