Table of Contents
Advertisement
drive B becomes drive A.
Floppy Drive
If you enable this item, your system will check the
diskette drives at start up time. Disable this item
Seek
unless you are using an old 360K diskette drive.
Password Check
If you have installed a password on your system,
use this item to determine if the password is
required to enter the setup utility (Setup) or
required at start-up time and to enter the setup
utility (Always).
Boot To OS/2
Enable this item if you are booting the OS/2
operating system and you have more than 64MB
of memory installed.
L2 Cache
Leave this item enabled since all the processors
that can be installed on this board have internal
cache memory.
System BIOS
If you enable this item, a segment of the system
Cacheable
BIOS will be cached to main memory for faster
execution.
DRAM
Use this item to define the frequency for the
Frequency
installed memory.
SDRAM CAS#
This item determines the operation of the main
memory CAS (column address strobe). We
Latency
recommend that you leave this item at the default
value.
DRAM Integrity
Use this item to define the kind of error correction
supported by the memory that you have installed.
Mode
AGP Mode
Use this item defines the AGP mode for the
installed AGP card.
AGP Aperture
This item defines an aperture for the AGP
Size
graphics. Leave this item at the default value 64
MB.
3: BIOS Setup Utility
25
Advertisement
Table of Contents
