Table of Contents
Advertisement
RS600A
1.2
Machine Description and Intended Use
The Wacker Neuson walk behind roller offers functionality and performance. The
compact design allows for covering of small patch-work processes.
This machine is a lightweight single drum handheld rollers are widely used in
asphalt applications for small jobs for road maintenance. It has:
Adjustable and foldable handle, which is convenient for transportation and
compact usage and for excellent operator visibility of sight lines.
Simplified water system for easy cleaning and reduce downtime; includes in-line
water filter.
Large anti-rust coated water tank that eliminates several stops for refilling.
Beveled edged front and rear bar that supports and keeps the roller balanced to
prevent it from scuffing and gouging of asphalt surfaces.
Automatic breaking system in forward and reverse motion.
Front tie-downs to secure the machine to the trailer.
Introduces a travel speed which is suitable for easy movement.
Optimize drum wall thickness and drum diameter for long service life and to
prevent deformation.
With roller chain drive for a more efficient transmission system and high
gradeability.
This machine has been designed and built strictly for the intended use described
above. Using the machine for any other purpose could permanently damage the
machine or seriously injure the operator or other persons in the area. Machine
damage caused by misuse is not covered under warranty.
The following are some examples of misuse:
Using the machine as a ladder, support, or work surface
Using the machine to carry or transport passengers or equipment
Operating the machine outside of factory specifications
Operating the machine in a manner inconsistent with all warnings found on the
machine and in the Operator's Manual.
This machine has been designed and built in accordance with the latest global
safety standards. It has been carefully engineered to eliminate hazards as far as
practicable and to increase operator safety through protective guards and labeling.
However, some risks may remain even after protective measures have been taken.
They are called residual risks. On this machine, they may include exposure to:
Heat, noise, exhaust, and carbon monoxide from the engine
Fire hazards from improper refueling techniques
Fuel and its fumes
Personal injury from improper lifting techniques
To protect yourself and others, make sure you thoroughly read and understand the
safety information presented in this manual before operating the machine.
wpm_si000517gb.fm
Safety Information
8
Advertisement
Table of Contents
