Machine Description And Intended Use - Wacker Neuson RT82-SC3 Operator's Manual

Safety Information
1.2

Machine Description and Intended Use

This machine is a remote-controlled trench roller. The Wacker Neuson Trench
Roller consists of two distinct machine halves (front and rear) joined by an
articulated joint. Each machine half includes an exciter assembly and two drums.
The front half also includes a diesel engine and pumps for the hydraulic system.
The rear half includes the hydraulic oil reservoir and the fuel tank. The diesel
engine powers the hydraulic systems that provide machine movement and drum
vibration. The operator controls all machine functions (steering, vibration, and
engine start/stop) using an infra-red control system.
This machine is intended to be used for compacting sub-bases, backfill, and
cohesive type soils.
This machine has been designed and built strictly for the intended use(s) described
above. Using the machine for any other purpose could permanently damage the
machine or seriously injure the operator or other persons in the area. Machine
damage caused by misuse is not covered under warranty.
The following are some examples of misuse:
■ Using the machine as a ladder, support, or work surface
■ Using the machine to carry or transport passengers or equipment
■ Using the machine to tow other machines
■ Operating the machine outside of factory specifications
■ Operating the machine in a manner inconsistent with all warnings found on the
machine and in the Operator's Manual
This machine has been designed and built in accordance with the latest global
safety standards. It has been carefully engineered to eliminate hazards as far as
practicable and to increase operator safety through protective guards and labeling.
However, some risks may remain even after protective measures have been taken.
They are called residual risks. On this machine, they may include exposure to:
■ Heat, noise, exhaust, and carbon monoxide from the engine
■ Burns from hot hydraulic fluid
■ Fire hazards from improper refueling techniques
■ Fuel and its fumes
■ Personal injury from improper lifting techniques
■ Crushing hazards from improper operation and for other persons in the work
zone
To protect yourself and others, make sure you thoroughly read and understand the
safety information presented in this manual before operating the machine.
18
RT / RTx
wc_si000902gb_FM10.fm