Direction And Speed Control - Wacker Neuson RS600A Operator's Manual

RS600A
4.8

Direction and Speed Control

Procedure Perform the following procedure in controlling the speed and direction.
1. Travel direction and speed is controlled by the travel lever. To move in the
forward direction, pull (toward the operator) on the right side (a) of the travel
lever.
2. To move in the reverse direction, pull (toward the operator) the left side (b) of
the travel lever. The further toward the operator the lever is pulled, the faster the
machine will travel. When neither side of the travel lever is pulled, the travel
lever is spring-centered to the stopped position.
CAUTION
Keep both hands on the guide handle while operating the machine. The guide
handle may pivot rapidly when the machine changes travel direction. This sudden
movement of the guide handle can cause injury if the guide handle is not under
control.
wpm_tx001560gb.fm
a
24
Operation
b
c
wpm_gr007596