Logging Into And Out Of The Operator Group; Figure 56. Add Members To Operator Group Menu - ADTRAN NetVanta 7100 Administrator's Manual

NetVanta 7100 Administrator's Guide
2. Select users to add to this operator group by using the check box to the left of the user entry. Select
Add Selected Users
menu.
Select new members using
the check boxes.
3. Select to accept the new setting.
Apply
4. Select at the top right of the current menu. A dialog box appears if the save is successful.
Save
Select to close the box and return to the previous menu.
OK

Logging into and out of the Operator Group

Members can log into the operator group with a SPRE code when they want to receive calls to the operator
group and log out using a SPRE code when they do not want to receive operator group calls.
From the desired phone, enter the following SPRE codes to log in or log out:
1. To enter the operator group, log in with *LL0* (*550*), where 0 represents the operator group
extension.
2. To exit the operator group, log out with *LO0* (*560*), where 0 represents the group extension.
61200796L1-31A
to update this operator group and return to the

Figure 56. Add Members to Operator Group Menu

Copyright © 2007 ADTRAN, Inc.
Configuring the System
Configure Operator Group
71