Setting Up Status Groups; Figure 58. Add/Edit/Delete Status Group Tab Menu; Figure 59. Status Group Details Menu - ADTRAN NetVanta 7100 Administrator's Manual

NetVanta 7100 Administrator's Guide

Setting Up Status Groups

Status groups are used to allow ADTRAN/Polycom IP phones to monitor the current status of other users
or park zones. Configuring Status Groups creates the Busy Lamp Field (BLF) and Direct Station Select
(DSS) settings on user phones. Refer to Display Status Group (Busy Lamp Field) on page 37 to optionally
select a status group to display on the phone. Note that this feature is only available for the ADTRAN/
Polycom SoundPoint IP 601.
1. Navigate to the
2. Enter a name for the new status group and select
3. From the
Status Group Details Menu,
the
Status Group Members
whether to identify the user in the status group by name or extension. This setting can be modified
later on.
4. Add Park Zones by selecting
5. Select to accept the new settings. An example of the phone display is shown in Figure 23 on
Apply
page 38.
61200796L1-31A
> >
Voice Applications

Figure 58. Add/Edit/Delete Status Group Tab Menu

list using the check boxes. In the
Add Park Zones

Figure 59. Status Group Details Menu

Copyright © 2007 ADTRAN, Inc.
menu.
Status Groups
Add New Status Group
add users by selecting
Add Users.
Display Name
and choosing the appropriate zone from the list.
Configuring the System
.
Choose members from
column, specify
73