Before You Begin
Check to make sure that all of your parts are there and in good shape.
Parts List
Number
in Kit
Bundled Parts
1
Laser Cut Parts (See wood inventory sheet)
1
Plan Sheet (24" x 36")
1
These instructions of course!
Metal (on the back of the wood bundle)
2
0.025" x 18" Wire
2
1/16" Pre-bent landing gear wire
Bagged Parts
1
3/32" Basswood elevator joiner
4
#2 x1/4" Motor mount screws
2
DuBro black wheel keepers and set screws
1
Velcro, sticky backed, 2"
2
Wheels
1
CF Rod, 0.060" x 1-5/8"
2
DuBro Micro Servo Connectors
1
1/8" x 2-1/2" Dowel
2
Magnets, 1/8" diameter, 1/16" thick
2
DuBro control horn
1
Spider Wire, 4 Feet
1
Aluminum tube, 3/32" diameter x 3/4"
Building Materials and Tools You Will Need
•
Smooth and FLAT work surface
•
Wax paper or clear plastic wrap to protect the work surface
•
Thin Cyanoacrylate (CA) glue
•
5 Minute Epoxy
•
Hobby knife with #11 blades
•
Needle nose pliers
•
Wire bender or pliers for bending pushrod wires
•
Wire cutters
•
Screwdrivers
•
Sanding block, 320 to 400 grit sandpaper
•
Sewing Needle, Small
•
Covering Iron
Finishing Materials You Will Need
•
Covering material (SoLite, 1 roll)
Description of Part
3