Before You Begin; Building Materials And Tools You Will Need; Finishing Materials You Will Need - Mountain Models Tom-E-Boy 150 Assembly Instruction Manual

Before You Begin

Check to make sure that all of your parts are there and in good shape.
Parts List
Number
in Kit
Bundled Parts
1 Laser Cut Parts (See wood inventory sheet)
1 Plan Sheet (24" x 36")
1 These instructions of course!
Metal and Misc. (on the back of the wood bundle)
2 0.025" x 18" Wire
2 1/16" Pre-bent landing gear wire
2 12" Length of 072 Pushrod Housing
Bagged Parts
4 #2 x1/4" Motor mount screws
2 DuBro black wheel keepers and set screws
1 Velcro, sticky backed, 2"
2 Wheels
2 DuBro Micro Servo Connectors
2 DuBro EZ Links
2 1/8" x 2-1/2" Dowel
2 Magnets, 1/8" diameter, 1/16" thick
2 DuBro control horn
1 1/16" Wire x 1.5"

Building Materials and Tools You Will Need


Smooth and FLAT work surface

Wax paper or clear plastic wrap to protect the work surface

Thin Cyanoacrylate (CA) glue

5 Minute Epoxy

Hobby knife with #11 blades

Needle nose pliers

Wire bender or pliers for bending pushrod wires

Wire cutters

Screwdrivers

Sanding block, 320 to 400 grit sandpaper

Covering Iron

Finishing Materials You Will Need


Covering material (SoLite, 1 roll)
Description of Part
3