Before You Begin
Check to make sure that all of your parts are there and in good shape.
Parts List
Number
in Kit
Bundled Parts
1
Laser Cut Parts (6 Sheets, See wood inventory page)
2
Plan Sheets (11" x 17")
1
These instructions of course!
Metal and Misc. (on the back of the wood bundle)
2
0.015" x 12" Wire (Pushrods)
1
1/32" x 9" Wire (Landing Gear)
Bagged Parts
1
Shrink Tube
2
1/16" Dowel x 2"
2
Wheels
Building Materials and Tools You Will Need
•
Smooth and FLAT work surface
•
Wax paper or clear plastic wrap to protect the work surface and plans
•
Thin Cyanoacrylate (CA) glue
•
Hobby knife with #11 blades
•
Needle nose pliers
•
Wire cutters
•
Sanding block, 320 to 400 grit sandpaper
•
Covering Iron
•
Soldering Iron
Finishing Materials You Will Need
•
Covering material (SoLite, 1/4 roll)
•
Deft clear lacquer or Design Master Color Tool lacquer
Electronics You Will Need
•
Power: ParkZone Motor/Gearbox (PKZ3624) for UM P-51/Sukhoi
•
Prop: EFL9051 Ultra Micro 130mm x 70mm
•
RX/ESC/Servo: ParkZone 'Vapor' PKZ3351 or Spektrum AR6400
•
1S-130 mAh LiPo
General Building Tips
•
READ THE INSTRUCTIONS all the way through and study the plans BEFORE starting any
work on the model.
Description of Part
3