Advertisement
Before You Begin
Check to make sure that all of your parts are there and in good shape.
Parts List
Number
in Kit
Bundled Parts
1
Laser Cut Parts Sheets (6 Sheets)
2
Plan Sheets (11" x 17")
1
These instructions of course!
Metal (on the back of the wood bundle)
1
0.020 x 18" Wire
1
0.020" x 12" Wire
1
1/32" x 12" landing gear wire
Bagged Parts
2
Wheels
1
1/16" Aluminum Tube
1
1/16" x 1" Shrink Tube
1
1/8" x 2-1/2" Dowel
6
#16 Rubber Bands
Building Materials and Tools You Will Need
•
Smooth and FLAT work surface
•
Wax paper or clear plastic wrap to protect the work surface
•
Thin Cyanoacrylate (CA) glue
•
Hobby knife with #11 blades
•
Needle nose pliers
•
Wire cutters
•
Sanding block, 320 to 400 grit sandpaper
•
Covering Iron
Finishing Materials You Will Need
•
SoLite Covering (Do NOT use heavier covering!!!!!!!!!!!!)
(You can use a light weight tissue covering instead of SoLite)
•
Double-Sided Foam Tape
•
Hinge Tape (DuBro or Similar)
•
Velcro to Mount Battery
Electronics You Will Need
•
Power: ParkZone Motor/Gearbox (PKZ3624) for UM P-51/Sukhoi
•
Prop: EFL9051 Ultra Micro 130mm x 70mm
•
RX/ESC/Servo: ParkZone 'Vapor' PKZ3351 or Spektrum AR6400
•
1S-130 mAh LiPo
Description of Part
3
Advertisement
