Card Entry Options (Terminal And Optional External Pin Pad); Insert: Chip Cards; Wave/Tap: Contactless Cards - Moneris Core Countertop V400c Manual

Card entry options (terminal and optional external PIN pad)

The V400c terminal and optional external PIN pad feature very similar designs, so the card entry methods are
the same on both.

Insert: Chip cards

Wave/Tap: Contactless cards

3. Note the following:
Your merchant account must be configured for contactless functionality.

Only Purchases, Refunds, and Balance Inquiries can be processed using a contactless card.

The transaction amount must be equal to or less than the contactless transaction limit set for

the card. If the amount is greater than the contactless limit for the card, when the customer
taps their card, the terminal displays "Limit exceeded" followed by "Insert or swipe". To
complete the transaction for the same amount, the customer inserts or swipes their card.
Moneris Core® V400c: Using your Terminal
1. The screen displays "Tap, insert, or swipe".
2. The customer inserts the card into the terminal's (or external PIN
pad's) chip reader.
Note: Unless the device prompts otherwise, do not swipe a chip card
even if the card has a magnetic stripe.
3. The customer may be prompted to key in a PIN.
4. The chip card must remain inserted until the screen displays "Please
remove your card".
1. The screen displays "Tap, insert, or swipe".
2. The customer taps their card over the contactless reader icon
which is embedded into the display screen.
Note: The card must be tapped or waved by itself (the
customer cannot leave the card in their wallet and wave it over
the contactless reader).
Note: If the customer is using a mobile device, they may be
directed to enter a passcode on their smartphone or tablet.
11