Charging The System - Sony SRS-BTV5 Help Manual

Help Guide
SRS-BTV5
Getting Started
BLUETOOTH
One touch connection (NFC)
Music
Phone calls
Troubleshooting
Important information

Charging the system

The system contains a lithium ion rechargeable battery, which should be charged before
using the system for the first time. You can use the speaker while charging the battery.
System requirements for battery charge using USB
Personal Computer with pre-installed with any of the following operating systems and USB
port:
Operating Systems
(when using Windows)
Windows® 7
Home Basic / Home Premium / Professional / Ultimate
Windows Vista® (Service Pack 2 or later)
Home Basic / Home Premium / Business / Ultimate
Windows® XP (Service Pack 3 or later)
Home Edition / Professional / Media Center Edition 2004 / Media Center Edition 2005
Contents list
(when using Macintosh)
Mac OS X (version 10.3 or later)
Charging the system
1. Open the jack cover of the system.
2. Connect the supplied micro-USB cable to the system, and then connect the other end
to a computer.
Make sure that you connect the plug of the micro-USB cable in the direction as shown
in the illustration below.
Charging starts when the system and the computer are connected.
Make sure that the BATT/CHG indicator (orange) lights up. Charging is completed in about 3
hours* and the BATT/CHG indicator (orange) goes off automatically.
* Time required to charge the empty battery to its full capacity
Notes
If the system is not used for a long time, the BATT/CHG indicator (orange) may not light
up when you connect the micro-USB cable to charge the system. In this case, do not
disconnect the micro-USB cable from the system and wait until the BATT/CHG indicator
(orange) lights up.
15
Search Search
Top > Getting Started > Power >