Hatch Preparation; Canopy/Cockpit Access - BVM PNP F-16 Assembly And Operating Manual

Hatch Preparation

 Apply Aeropoxy around the Hatch Alignment pins and Hatch Latches for extra security.

Canopy/Cockpit Access

Removing the Canopy will allow easy access
to the cockpit area while installing your
components.
 To release the Canopy manually, push on
the spring loaded Retaining Rod in the
Nose Cone area.
Use the BVM Canopy Jet Foam Support to
hold the canopy in the up position when the
power is off.
BVM ®2016 15 4/12/2019