Operation
7.8 "Display" menu
7.9 "Password" menu
7.10 "Network" menu
Page 52 of 96
01-37A2-7D0003_Operating instructions_MPC_20210923_0_en.docx
Motor Purge Controller
The contrast and brightness of the LCD
display on the p-Operator panel can be
set in the "Display" tab.
A new password can be stored for the
guest and user in the "Password" tab.
All network-specific settings are
carried out in the "Network" menu.
By default, the Ex p control unit is set
to a static IP address. In addition, it is
possible to activate a DHCP mode.
Ex p control unit
Rev. 0