Installing Sfps; Removing Sfps - Alcatel-Lucent 7705 Installation Manual

SFPs

Installing SFPs

To install an SFP:
Step 1.
Step 2.
Step 3.

Removing SFPs

When you are removing an SFP, have the following parts ready:
To remove an SFP:
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Page 80
Remove the SFP from the packaging and place it on a flat anti-static work surface.
Hold the SFP by its sides and insert it into the appropriate port until it clicks into
place.
For optical SFPs, remove the protective plug from the SFP port when you are ready
to attach the fiber cable.
• a replacement SFP or protective plug for the empty Ethernet port
• a protective plug for the SFP
• a dust cover for the fiber cable connector
• an anti-static mat or electrostatic bag
Disconnect the cable from the SFP connector.
Release the locking mechanism on the SFP with your thumb and forefinger. See
Locking and Release Mechanisms on page 78
lock and release methods. Slide the SFP out of the port.
Place the SFP on an anti-static mat or in an electrostatic bag.
Install a replacement SFP or insert a protective plug into the Ethernet port.
Connect the fiber or copper cable, or insert a protective plug into the optical port and
place a dust cover on the fiber cable connector.
for descriptions of the different SFP
7705 SAR-F Installation Guide