Alcatel-Lucent 7705 Installation Manual page 30

Mandatory Regulations
NRTL
This equipment is certified by the NRTL as meeting the requirements of UL 60950-1, Safety
of Information Technology Equipment.
NRTL Approval for External DC Supplies
When the system is equipped with an AC rectifier, the rectifier must have NRTL-accredited
approval. In addition, the DC outputs must meet UL 60950-1 SELV requirements.
Safety Approval for DC Systems
The DC source for the system must meet the requirements of a SELV source in accordance
with UL 60950-1. You must use the system with a SELV secondary source that is
electrically isolated from the AC source and that is grounded reliably.
Food and Drug Administration
This product complies with 21 CFR 1040.10 and 1040.11 regulations, which govern the safe
use of lasers. Only qualified service personnel, thoroughly familiar with laser radiation
hazards, should install or remove the fiber-optic cables used in this system. You can find
information about the safe use of lasers in ANSI Z 136.1: Safe Use of Lasers and ANSI Z
136.2: Safe Use of Lasers in Optical Fiber Communications Systems. You can obtain these
documents and other instructional material from:
Laser Institute of America
12424 Research Parkway, Suite 125
Orlando, FL 32826-3274
Page 30 7705 SAR-F Installation Guide